Navigation
Research & Publications
Patents
Sr. No |
Name of Faculty |
Patent Title |
Application No. |
Present Status (if awarded. Patent No.) |
1 |
Dr. B. R. Mahajan |
“Stroke Less Rotary Vane Engine” patent numbered | 201821046782. |
Published |
2 |
Prof. Siddharth S. Ghosh |
Design Of Washing Space For Utensils For Avoiding Squatting Posture Of Maid Servants. | _ |
Under Process |
List of Faculty-Research Area
S. No. |
Name of Faculty |
Designation |
Area of Interest |
1 |
Dr. P. B. Maheshwary |
Professor |
Design & Thermal |
2 |
Dr. B. R. Mahajan |
Assistant Professor |
Design |
3 |
S. A. Rewatkar |
Assistant Professor |
Design |
4 |
P.P. Ulhe |
Assistant Professor |
Production |
5 |
A.A. Junankar |
Assistant Professor |
Industrial |
6 |
P. M. Gupta |
Assistant Professor |
Thermal |
7 |
A. R. Sayed |
Assistant Professor |
Production |
8 |
N. V. Bhende |
Assistant Professor |
Design |
9 |
J. S. Pachbhai |
Assistant Professor |
Thermal |
10 |
G. M. Gohane |
Assistant Professor |
Industrial |
11 |
D. A. Agarwal |
Assistant Professor |
Thermal |
12 |
B. H. Verma |
Assistant Professor |
Design |
13 |
D. A. Yelure |
Assistant Professor |
Automobile |
14 |
S. S. Ghosh |
Assistant Professor |
Industrial |
15 |
R. B. Sharma |
Assistant Professor |
Thermal |
16 |
H. K. Baitule |
Assistant Professor |
Design |
17 |
R. G. Deshmukh |
Assistant Professor |
Thermal |
18 |
S. G. Chakrabarty |
Assistant Professor |
Thermal |
List of Publications
Journal Publications
1 | AnupA. Junankar,Jayant K. Purohitand N. V.Bhende, A Framework For Integration Of Internet Of Things With Minimum Quantity Lubrication System (February 22, 2019). Available at Elsevier SSRN: https://ssrn.com/abstract=3356491 or http://dx.doi.org/10.2139/ssrn.3356491 |
2 | A. A. Junankar and P.N.Shende, minimization Of Rework In Belt Industry UsingDMAIC, International Journal of Applied Research in Mechanical Engineering 1 (1), 53-59, 2011 |
3 | AAJunankar, PM Gupta, AR Sayed, NV Bhende,Six Sigma Technique For Quality Improvement In Valve Industry,IJREAT International Journal of Research in Engineering & Advanced Technology, 2 (1), 2015, |
4 | Design & Fabrication of Zero Degree Turn Four Wheel Steering Stystem,IJSRD, Vol. 4, Issue 12Feb, 2017 | ISSN (online): 2321-0613 |
5 | Review on Heat Transfer Enhancement Technique using Twisted Tape in Laminar and Turbulent Flow in a Circular Duct.IJAERD, ISSN:2348-6404 |
6 | Experimental Analysis of Heat Transfer Augmentation usingCompund Methodology.IJAERD, ISSN:2348-4470 |
7 | Experimental investigation of C45 (AISI 1045) weldments using SMAW and GMAW, AIP Conference Proceedings 2148, 030047 (2019); https://doi.org/10.1063/1.5123969 |
8 | Journal of Emerging Technology and Innovative Research (JETIR) on dated 05 May 2018 Volume 5 Issue 5 on topic “ Study and performance of GMAW & GTAW on 5059 Aluminum alloy” |
9 | “Deep Tillage Fertilization of Cotton Crop through Multilayered Fertilizer-cum-Cotton Seed Sowing Drill Applicator”, in AIP Conference Proceedings 2148, 030025-1 to 8, 3rd Sept’2019. |
10 | “Design of Hybrid Air Cooler Using Vapor Compression Refrigeration System” in International Journal for Innovative Research in Multidisciplinary Field, Vol-3, Issue-2, Feb-2017. |
11 | Performance, Evaluation and Analysis of Bull Drawn Multipurpose Fertilizer Drill Device” in IJPARET, Impact Factor 4.226, ISSN: 2319-507X, 30th March’2016. |
12 | MQL: An Emerging cooling technique for cutting operation, IJSRD, ISSN: 2321-0613,Volume 4, Issue 12, Feb 2017 |
13 | “Minimum quantity lubrication system on straight turning operation”, IJIRMF, ISSN: 2455-0620,Volume 3, Issue 1, Jan 2017 |
14 | Paper Published in‘International Journal for Research in Applied Science & Engineering Technology’ on “A Review Study of Air Quality Detector using Iot inStreets and Automobiles”.ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 6.887.Volume 7 Issue II, Feb 2019- Available at www.ijraset.com |
15 | Paper Published in ‘International Journal of Advance Engineering and Research Development’ on “A Review Paper on Solar Dryer (AMLA SEGMENT)”.Volume 5, Issue 02, February -2018. |
16 | Paper Published in ‘International Journal of Advance Engineering and Research Development’ on “A Review on Design, Fabrication and Experimentation of Bed mounted Air Conditioning Unit”.Volume 3,Issue 4,April -2016 |
17 | Paper Published in ‘International Research Journal of Engineering and Technology (IRJET)’ on “Design and Construction of Solar Dryer for Drying Agricultural Products”.Volume: 04 Issue: 03 | Mar -2017 |
18 | Paper Published in ‘International Journal of Research in Engineering & Advanced Technology,’ on “Six Sigma Technique for Quality Improvement In Valve Industry”.Volume 2, Issue 1, Feb-Mar, 2014 |
19 | Suhas A Rewatkar Review of influence of different cutting angles of Single Point Cutting tool on Turning Operation IRJET 2395-0072,Vol.04,Issue-02,Feb 2017 |
20 | Suhas A Rewatkar optimisation of cutting parameter for facing operation – A review using Taguchi Method IJAERD2348-6406, vol.05,Issue-03,march-2018 |
21 | Suhas Rewatkar optimisation of process parameter for turning operation – A review using Taguchi Method IJAERD 2348-4470, vol.05,Issue-03,march-2018 |
22 | Suhas Rewatkar A review on optimisation of cutting parameters for surface roughness in facing process using Taguchi Method IJEDR 2321-9939,Vol.06,Issue-01,March 2018 |
23 | ”Fabrication of Hybrid Air Cooler by using Vapor Compression Refrigeration System” at International Journal for Scientific Research & Development, Volume 4, Issue 12, Feb 2017. |
24 | “Review of Conventional and Advance Wheelchair” at International Journal for Scientific Research & Development, Volume 4, Issue 12, Feb 2017. |
Conference Publication
1 |
ELSEVIER Materials today PROCEEDINGS 9International conference on Material Processing & Characterization (ICMPC-2019) held at GRIET , Hyderabad, Telangana on dated 08 March 2019 to 10March 2019. |
2 |
NV Bhende, JK Purohit, AAJunankar, A Proposed Concept For Fertilizer Placement Under Three Different Depths Of Soil Through Multilayered Fertilizer-Cum-Cotton Seed Drill Applicator, AIP Conference Proceedings 2148, 030025 (2019); https://doi.org/10.1063/1.5123947 |
3 |
International Conference on Appropriate Technology for Sustainable Development (ICATSD) on dated 27 & 28 March 2018 on Topic “Sustainable Development based on Energy Usage” held at J D College of Engg. & Mgmt Nagpur |
4 |
Anup A Junankar, Jayant K Purohit, Nikhil V Bhende, Effective Utilization Of Nanofluids For Machining Process Enhancement, AIP Conference Proceedings 2148, 030040 (2019); https://doi.org/10.1063/1.5123962 |
5 |
“An IoT based Agri-Cloud Architectural Framework for Monitoring Presence of Fertilizer under Multilayered Soil Farming” 4th International Conference on Internet of Things and Connected Technologies (ICIoTCT), 2019 Malaviya National Institute of Technology (MNIT), Jaipur May 09-10, 2019. |
6 |
“Performance, Evaluation and Analysis of Bull Drawn Multipurpose Fertilizer Drill Device” in the 4th International Conference on Emerging Trends and Research At DRGITR, IBBS, Amravati, on 30th & 31st March’2016. |
Innovation & Startup Projects:
Name of Project:
Design of material handling conveying system for lucent energy pvt ltd
Objective and outcome:
To overcome the problem raised in material handling and increase the reduction rate
Session:
2014-15
Name of Project:
Alternate Cooling Technology for Turbine Blade Cooling by Introduction of Dimple Surface With Notch & its Comparison With Conventional Method.
Objective and outcome:
To analyze cooling system and give optimize solution in turbine cooling
Session:
2015-16
Name of Project:
Quality improvement technique for various welding process in bajaj steel pvt ltd
Objective and outcome:
To analyze the welding strength of different welding processes and give a optimize solution
Session:
2016-17